Item # AA580, ARON ALPHA Type Gel 10 On Toagosei America, Inc.

All Toagosei America Technologies > Instant Adhesives > Thixotropic Instant Adhesives: ARON ALPHA 200TX SERIES > ARON ALPHA 200TX Series Instant Adhesives > Item # AA580


	Item # AA580, ARON ALPHA Type Gel 10

larger image

Aron Alpha 200TX Series
Aron Alpha 200TX Series a thixotropic, no-run, no glue string formulation. Highly cohesive and designed for high speed dispensing/automatic assembly applications. Greatest gap-fill ability.

Specifications · Before Curing · After Curing · Storage · Warning · Features · Characteristics of Aron Alpha® Cyanoacrylate Adhesives · Method of Disposal · Precaution · Setting Time · Bonding Strength (Tensile) · Bonding Strength (Shear) · Applications

Specifications

Buy Now

Series		200TX

Type		Gel 10

Unit Size		20 gm tube

Units per case		25

Color		Clear

Gap Fill		0.010"

Viscosity		170000 cps

Tensile Shear Strength (Steel)		4600 psi

Temperature Range		-65 ºF to +180 ºF

Set Time (Steel)		20 s

Bonding Strength to Metal		Good

Bonding Strength to Electroplating		Good

Bonding Strength to Rubber		Good

Bonding Strength to Plastic		Good

Set Time(PVC)		5 s

Set Time (ABS)		15 s

Set Time (Polycarbonate)		30 s

Set Time (Chroloprene)		15 s

Set Time (EPDM)		3 s

Set Time (Steel)		20 s

Set Time (Aluminum)		30 s

Tensile Strength (PVC)		27 N/mm²

Tensile Strength (ABS)		21 N/mm²

Tensile Strength (Iron)		30 N/mm²

Tensile Strength (Aluminum)		20 N/mm²

Tensile Shearing Strength (Polycarbonate)		6 N/mm²

Tensile Shearing Strength (Chroloprene)		0.6 N/mm²

Tensile Shearing Strength (EPDM)		0.6

Form of Packing (20g)		Good

Form of Packing (50g)		Good

Tensile Strength		0.5 x 0.5 x 1.5 inch; bonded area 0.25 sq. inch

Tensile Shear Strength (for plastic and rubber)		0.1 x 1.0 x 4.0 inch; bonded area 0.5 sq.inch

Tensile Shear Strength (for metal)		0.064 x 1.0 x 4.0 inch; bonded area 0.5 sq. inch

Bonding Atmosphere		22 to 24 ºC 72 to 75 ºF

Relative Humidity		58-62%

Testing Methods		ASTM D2095, D3164, and D1002

Before Curing

Appearance (Liquid State)		Colorless and Transparent

Base Monomer (Liquid State)		Ethyl 2-Cyanoacrylate

After Curing

Appearance (Solid State)		Colorless and Transparent

Hardness (Rockwell M)-(Solid State)		85

Softening Point (Vicat)-(Solid State)		145 ºC 293 ºF

Storage

Store product in the unopened container in a dry location.

Humidity

Avoid moist, humid storage conditions.
Fasten cap tightly to avoid exposure to moisture.
Store with desiccant.

Temperature

Avoid storing at a

Warning

May have an irritating odor, Aron Alpha might irritate eyes, nose and throat. Please maintain proper ventilation it is used in large amounts or for a long period of time. Please wear protective glasses and/or hood shield.
In case of absorbing into cloth, Aron Alpha will rapidly polymerize and result in heating. During operation, avoid wearing gloves made of absorbable materials, instead use solvent proof polyethylene gloves.
ARON ALPHA is a flammable liquid. Use in a well ventilated area, and keep away from fire.
Eye and Skin irritant. Bonds skin instantly. Combustible - keep away from heat and flames.

Features

No stringiness.
Thixotropic property.
Fast setting to a variety of materials.
Good bonding strength to various materials.
Good compatibility to dispensing machines.

Characteristics of Aron Alpha® Cyanoacrylate Adhesives

Characteristics		Instant Bonding : Adhesion is achieved in a few seconds, It is well suited for increasing the efficiency of the manufacturing process. Easy to use: Adhesive is single component and heat treatment are not required. Perfect f

Method of Disposal

Expose the adhesives in the containers to moisture and light to let it harden slowly, and to treat it as waste plastics (drastic hardening may result in heating, pay attention to this situation).
Please comply with local regulations when dispos

Precaution

When in contact with Skin

Don't peel it off forcibly, instead use warm water or remover to rub it off.

When in contact with Eyes

It will damage the eyes to rub the eyes or to use solvents. Must rinse with large amount of water and get medical attention.

Setting Time

(in seconds for various materials)

Material	Setting Time (sec)
(Substrate material bonded to substrate material)	203TX	212TX	214TX	225FTX	252TX	253TX
PVC (Rigid)/PVC	5	3	5	5	5	10
PMMA (Polymethylmetacrylate)/PMMA	10	3	--	10	5	15
ABS (Acrylonitrile butadiene styrene)/ABS	15	5	15	15	10	30
PC (Polycarbonate)/PC	15	5	--	30	15	30
Natural Rubber/Natural Rubber	10	3	5	5	5	10
Steel/Steel	15	5	--	20	10	30
Copper/Copper	--	--	--	3	--	--
Phenolic Resin/Phenolic Resin	--	--	--	5	--	--
Rigid PVC/Steel	15	5	--	20	10	30
Aluminum/ABS	15	5	20	30	10	30
Phenolic Resin/Copper	--	--	--	5	--	--
Neoprene Rubber/Steel	15	5	--	10	10	30
Neoprene Rubber/ABS	15	5	--	10	10	30
Balsa Wood/Balsa Wood	--	--	10	--	--	3

Bonding Strength (Tensile)

(Tensile measured in psi for various materials)

Material	Tensile Strengths (psi)
(Substrate material bonded to substrate material)	203TX	212TX	214TX	225FTX	252TX	253TX
PVC (Rigid)/PVC	5000	5000	3500	3840	5000	5000
PMMA/PMMA	5000	5000		2840	5000	5000
ABS/ABS	3600	3600		2990	3600	3600
PC/PC	5000	5000		3560	5000	5000
Natural Rubber/Natural Rubber	360	360		280	360	360
Steel/Steel	4600	4600	3500	4270	4600	4600
Copper/Copper				4550
Phenolic Resin/Phenolic Resin				4270
Rigid PVC/Steel	2600	2600		2560	2600	2600
Aluminum/ABS	2100	2100		2130	2100	2100
Phenolic Resin/Copper				3560
Neoprene Rubber/Steel	360	360		280	360	360
Neoprene Rubber/ABS	360	360		280	360	360

Bonding Strength (Shear)

(Shear measured in psi for various materials)

Material	Shear Strengths (psi)
(Substrate material bonded to substrate material)	203TX	212TX	214TX	225FTX	252TX	253TX
PVC (Rigid)/PVC	1400	1400		1000	1400	1400
PMMA/PMMA	710	710		710	710	710
ABS/ABS	710	710		710	710	710
PC/PC	1000	1000		1000	1000	1000
Natural Rubber/Natural Rubber	57	57	100	70	57	57
Steel/Steel	2800	2800	2800	2840	2800	2800
Copper/Copper				2130
Phenolic Resin/Phenolic Resin				1000
Rigid PVC/Steel	1400	1400		1000	1400	1400
Aluminum/ABS	1000	1000		710	1000	1000
Phenolic Resin/Copper				1000
Neoprene Rubber/Steel	57	57		70	57	57
Neoprene Rubber/ABS	57	57		70	57	57
Balsa Wood/Balsa Wood			70

Applications

For Wood Work: Suitable for bonding wood. Complete and wide range of adhesive grades available. Suitable for assembling wooden products and repairing. Wooden molds and expensive rare woods.
Artificial Marble: For use on artificial marble with various kinds of colors such as transparent, white, black and grey.
Color Grades: Able to confirm the coating colors of adhesives.
Remover: For use in removing hardened substances and peel off parts of adhesives

DOWNLOADS


		225FTX (GEL-10) SDS.pdf (PDF, 254KB)

Surface Primers and Accelerators



	ARON ALPHA PP Primer



	ARON ALPHA PP Primer S

more available ..

Item # AA580, ARON ALPHA Type Gel 10

Buy Now

Series

Type

Unit Size

Units per case

Color

Gap Fill

Viscosity

Tensile Shear Strength (Steel)

Temperature Range

Set Time (Steel)

Bonding Strength to Metal

Bonding Strength to Electroplating

Bonding Strength to Rubber

Bonding Strength to Plastic

Set Time(PVC)

Set Time (ABS)

Set Time (Polycarbonate)

Set Time (Chroloprene)

Set Time (EPDM)

Set Time (Steel)

Set Time (Aluminum)

Tensile Strength (PVC)

Tensile Strength (ABS)

Tensile Strength (Iron)

Tensile Strength (Aluminum)

Tensile Shearing Strength (Polycarbonate)

Tensile Shearing Strength (Chroloprene)

Tensile Shearing Strength (EPDM)

Form of Packing (20g)

Form of Packing (50g)

Tensile Strength

Tensile Shear Strength (for plastic and rubber)

Tensile Shear Strength (for metal)

Bonding Atmosphere

Relative Humidity

Testing Methods

Appearance (Liquid State)

Base Monomer (Liquid State)

Appearance (Solid State)

Hardness (Rockwell M)-(Solid State)

Softening Point (Vicat)-(Solid State)

Characteristics

Quick Contact