Aron Alpha 800 Series is an odorless, non-frosting general purpose adhesive providing transparent bond lines. Ideal for applications where strength and appearance are critical.
Unit of Measure

Specifications

Series

N/A 800

Type

N/A 803

Unit Size

N/A 20 gm bottle

Units per case

N/A 25

Color

N/A Clear

Gap Fill

N/A 0.004"

Viscosity

N/A 1500 cps

Tensile Shear Strength (Steel)

N/A 4400 psi

Temperature Range

N/A -65 ºF to +130 ºF

Set Time (Steel)

N/A 30 s

Boiling Point

N/A 204 ºC400 ºF

Pressure

N/A 5 mmHg

Surface Tension

N/A 37 dynes/mm

Solubility Parameter

N/A 10-11

Hardness (Shore D, 23°C/ 73°F)

N/A 80

Tensile Strength

N/A 0.5 x 0.5 x 1.5 inch; bonded area 0.25 sq. inch

Tensile Shear Strength (for plastic and rubber)

N/A 0.1 x 1.0 x 4.0 inch; bonded area 0.5 sq.inch

Tensile Shear Strength (for metal)

N/A 0.064 x 1.0 x 4.0 inch; bonded area 0.5 sq. inch

Bonding Atmosphere

N/A 22 to 24 ºC72 to 75 ºF

Relative Humidity

N/A 58-62%

Testing Methods

N/A ASTM D2095, D3164, and D1002

Before Curing

Appearance (Liquid State)

N/A Colorless and Transparent

Base Monomer (Liquid State)

N/A Ethoxyethyl 2-Cyanoacrylate

Viscosity (Liquid State)

N/A 1500 cps

Specific Gravity (d20)-(Liquid State)

N/A 1.07

Flash Point (Closed Cup)-(Liquid State)

N/A 112 ºC234 ºF

Freezing Point (Liquid State)

N/A -20 ºC-4 ºF

After Curing

Appearance (Solid State)

N/A Colorless and Transparent

Specific Gravity (d20)-(Solid State)

N/A 1.17

Hardness (Rockwell M)-(Solid State)

N/A 55

Refractive Index (n20)-(Solid State)

N/A 1.48

Solvents

N/A Acetone, Dimethyl formamid, Dimethyl Sulfoxide

Rate of Line Expansion (x 10-4)-(Solid State)

N/A 1.0

Glass Transition Point (Solid State)

N/A 80 ºC176 ºF

Dielectric Constant (10MC, 50°F)-(Solid State)

N/A 3.5

Volume dielectric resistivity (Ω-cm, 86°F)

N/A 1014

Characteristics of Aron Alpha® Cyanoacrylate Adhesives

Characteristics

N/A
  • Instant Bonding :
    Adhesion is achieved in a few seconds, It is well suited for increasing the efficiency of the manufacturing process.
  • Easy to use:
    Adhesive is single component and heat treatment are not required. Perfect f

Setting Time

N/A

(Tensile measured in psi for various materials)

  801 802 803
Rigid PVC 4500 4500 4500
Polymethylmethacrylate (PMMA) 3700 3700 3700
ABS 2600 2600 2600
Polycarbonate 3300 3300 3300
Steel 4400 4400 4400
Aluminum 3800 3800 3800
Stainless steel 3700 3700 3700
Rigid PVC + Steel 2100 2100 2100
Aluminum + ABS 2000 2000 2000
Stainless steel + FRP 3100 3100 3100

Bonding Strength (Tensile)

N/A

(Tensile measured in psi for various materials)

  801 802 803
Rigid PVC 4500 4500 4500
Polymethylmethacrylate (PMMA) 3700 3700 3700
ABS 2600 2600 2600
Polycarbonate 3300 3300 3300
Steel 4400 4400 4400
Aluminum 3800 3800 3800
Stainless steel 3700 3700 3700
Rigid PVC + Steel 2100 2100 2100
Aluminum + ABS 2000 2000 2000
Stainless steel + FRP 3100 3100 3100

Bonding Strength (Shear)

N/A

(Shear measured in psi for various materials)

  801 802 803
Rigid PVC 1000 1000 1000
Polymethylmethacrylate (PMMA) 700 700 700
ABS 700 700 700
Polycarbonate 570 570 570
Steel 2400 2400 2400
Aluminum 1700 1700 1700
Stainless steel 2400 2400 2400
Rigid PVC + Steel 1000 1000 1000
Aluminum + ABS 700 700 700
Stainless steel + FRP 2300 2300 2300

Applications

N/A

  • For Wood Work: Suitable for bonding wood. Complete and wide range of adhesive grades available. Suitable for assembling wooden products and repairing. Wooden molds and expensive rare woods.
  • Artificial Marble: For use on artificial marble with various kinds of colors such as transparent, white, black and grey.
  • Color Grades: Able to confirm the coating colors of adhesives.
  • Remover: For use in removing hardened substances and peel off parts of adhesives

Storage

N/A

  • Store product in the unopened container in a dry location.

Humidity

  • Avoid moist, humid storage conditions.
  • Fasten cap tightly to avoid exposure to moisture.
  • Store with desiccant.

Temperature

  • Avoid storing at a

Method of Disposal

N/A

  • Expose the adhesives in the containers to moisture and light to let it harden slowly, and to treat it as waste plastics (drastic hardening may result in heating, pay attention to this situation).
  • Please comply with local regulations when dispos

Features

N/A

  • Fast setting to various materials
  • Good bond strength to various materials
  • No odor
  • No Chlorosis

Precaution

N/A

When in contact with Skin

  • Don't peel it off forcibly, instead use warm water or remover to rub it off.

When in contact with Eyes

  • It will damage the eyes to rub the eyes or to use solvents. Must rinse with large amount of water and get medical attention.

Warning

N/A

  • May have an irritating odor, Aron Alpha might irritate eyes, nose and throat. Please maintain proper ventilation it is used in large amounts or for a long period of time. Please wear protective glasses and/or hood shield.
  • In case of absorbing into cloth, Aron Alpha will rapidly polymerize and result in heating. During operation, avoid wearing gloves made of absorbable materials, instead use solvent proof polyethylene gloves.
  • ARON ALPHA is a flammable liquid. Use in a well ventilated area, and keep away from fire.
  • Eye and Skin irritant. Bonds skin instantly. Combustible - keep away from heat and flames.