Request Information

Aron Alpha 600 Series is designed for moisture resistance. Suitable for bonding materials for electroplating and resins that are challenging to bond

Unit of Measure

Specifications

Series

 N/A 600

Type

 N/A 601

Color

 N/A Clear

Gap Fill

 N/A 0.002"

Viscosity

 N/A 3 cps

Tensile Shear Strength (Steel)

 N/A 4400 psi

Temperature Range

 N/A -65 ºF to +180 ºF

Set Time (Steel)

 N/A 30 s

Bonding Strength to Metal

 N/A Good

Bonding Strength to Electroplating

 N/A Excellent

Bonding Strength to Rubber

 N/A Good

Bonding Strength to Plastic

 N/A Good

Moisture Resistance

 N/A Good

Set Time(PVC)

 N/A 5 s

Set Time (ABS)

 N/A 15 s

Set Time (Polycarbonate)

 N/A 20 s

Set Time (Steel)

 N/A 15 s

Set Time (Aluminum)

 N/A 15 s

Tensile Strength (PVC)

 N/A 30 N/mm²

Tensile Strength (ABS)

 N/A 25 N/mm²

Tensile Strength (Iron)

 N/A 30 N/mm²

Tensile Strength (Aluminum)

 N/A 23 N/mm²

Tensile Shearing Strength (Polycarbonate)

 N/A 5 N/mm²

Form of Packing (20g)

 N/A Good

Form of Packing (50g)

 N/A Good

Boiling Point

 N/A 53 ºC128 ºF

Pressure

 N/A 5 mmHg

Surface Tension

 N/A 32 dynes/mm

Solubility Parameter

 N/A 10

Set Time (Chroloprene)

 N/A 1 s

Set Time (EPDM)

 N/A 1 s

Tensile Shearing Strength (Chroloprene)

 N/A 0.6 N/mm²

Tensile Shearing Strength (EPDM)

 N/A 0.6

Main Ingredient

 N/A Isolpropyl 2-Cyanoacrylate

Before Curing

Appearance (Liquid State)

 N/A Colorless and Transparent

Viscosity (Liquid State)

 N/A 2 cps

Specific Gravity (d20)-(Liquid State)

 N/A 1.00

Flash Point (Closed Cup)-(Liquid State)

 N/A 77 ºC171 ºF

Freezing Point (Liquid State)

 N/A 19 ºC-2 ºF

After Curing

Appearance (Solid State)

 N/A Colorless and Transparent

Specific Gravity (d20)-(Solid State)

 N/A 1.16

Hardness (Rockwell M)-(Solid State)

 N/A 55

Refractive Index (n20)-(Solid State)

 N/A 1.48

Solvents

 N/A Acetone, Dimethyl formamid, Dimethyl Sulfoxide

Rate of Line Expansion (x 10-4)-(Solid State)

 N/A 1.3

Glass Transition Point (Solid State)

 N/A 210 ºC210 ºF

Dielectric Constant (10MC, 50°F)-(Solid State)

 N/A 3.5

Volume dielectric resistivity (Ω-cm, 86°F)

 N/A 1014

Characteristics of Aron Alpha® Cyanoacrylate Adhesives

Characteristics

 N/A
  • Instant Bonding :
    Adhesion is achieved in a few seconds, It is well suited for increasing the efficiency of the manufacturing process.
  • Easy to use:
    Adhesive is single component and heat treatment are not required. Perfect f

Setting Time

N/A

(in seconds for various materials)

Material 601F 602F
Rigid PVC 1 3
Polymethylmethacrylate (PMMA) 1 3
ABS 1 5
Polycarbonate 1 5
Polystyrene 3 10
Nylon 3 10
FRP 15 15
Natural Rubber 3 3
Neoprene Rubber 1 1
NBR (BUNA-N) 1 1
EPDM/EPT Rubber 3 5
Urethane Rubber 3 5
Steel 3 5
Aluminum 3 5
Stainless Steel 3 5
Rigid PVC/Steel 3 5
Aluminum/ABS 3 5
Neoprene/Steel 3 5
Neoprene/ABS 1 5
Stainless Steel/FRP 15 15

Bonding Strength (Tensile)

N/A

Tensile measured in psi for various materials)

Material 601F 602F
Rigid PVC 4300 4300
Polymethylmethacrylate (PMMA) 5000 5000
ABS 3600 3600
Polycarbonate 4100 4100
Polystyrene 2800 2800
Nylon 2100 2100
FRP 4000 4000
Natural Rubber 360 360
Neoprene Rubber 360 360
NBR (BUNA-N) 360 360
EPDM/EPT Rubber 430 430
Urethane Rubber 850 850
Steel 4300 4300
Aluminum 3300 3300
Stainless Steel 3800 3800
Rigid PVC/Steel 2400 2400
Aluminum/ABS 2400 2400
Neoprene/Steel 360 360
Neoprene/ABS 360 360
Stainless Steel/FRP 2800 2800

Bonding Strength (Shear)

N/A

(Shear measured in psi for various materials)

Material 601F 602F
Rigid PVC 1400 1400
Polymethylmethacrylate (PMMA) 710 710
ABS 710 710
Polycarbonate 710 710
Polystyrene 570 570
Nylon 1110 1110
FRP 2400 2400
Natural Rubber 57 57
Neoprene Rubber 57 57
NBR (BUNA-N) 57 57
EPDM/EPT Rubber 71 71
Urethane Rubber 110 110
Steel 2300 2300
Aluminum 2000 2000
Stainless Steel 2100 2100
Rigid PVC/Steel 1400 1400
Aluminum/ABS 1000 1000
Neoprene/Steel 57 57
Neoprene/ABS 57 57
Stainless Steel/FRP 2100 2100

Applications

N/A

  • For Wood Work: Suitable for bonding wood. Complete and wide range of adhesive grades available. Suitable for assembling wooden products and repairing. Wooden molds and expensive rare woods.
  • Artificial Marble: For use on artificial marble with various kinds of colors such as transparent, white, black and grey.
  • Color Grades: Able to confirm the coating colors of adhesives.
  • Remover: For use in removing hardened substances and peel off parts of adhesives

Storage

N/A

  • Store product in the unopened container in a dry location.

Humidity

  • Avoid moist, humid storage conditions.
  • Fasten cap tightly to avoid exposure to moisture.
  • Store with desiccant.

Temperature

  • Avoid storing at a

Water Resisting Property

N/A

Bonding strength in tension by Aluminum/Aluminum measured in psi.

  Initial 122ºF x 95%RH x 6 months Immersion 158ºF Water x 12 days
600F Series 3300 2800 1300
100 Series 4000 570 140
200 Series 2800 1800 430

Method of Disposal

N/A

  • Expose the adhesives in the containers to moisture and light to let it harden slowly, and to treat it as waste plastics (drastic hardening may result in heating, pay attention to this situation).
  • Please comply with local regulations when dispos

Features

N/A

Precaution

N/A

When in contact with Skin

  • Don't peel it off forcibly, instead use warm water or remover to rub it off.

When in contact with Eyes

  • It will damage the eyes to rub the eyes or to use solvents. Must rinse with large amount of water and get medical attention.

Warning

N/A

  • May have an irritating odor, Aron Alpha might irritate eyes, nose and throat. Please maintain proper ventilation it is used in large amounts or for a long period of time. Please wear protective glasses and/or hood shield.
  • In case of absorbing into cloth, Aron Alpha will rapidly polymerize and result in heating. During operation, avoid wearing gloves made of absorbable materials, instead use solvent proof polyethylene gloves.
  • ARON ALPHA is a flammable liquid. Use in a well ventilated area, and keep away from fire.