Item # AA923, ARON ALPHA Type 901H2F On Toagosei America, Inc.

All Toagosei America Technologies > Instant Adhesives > Flexible Instant Adhesives: ARON ALPHA 900 SERIES > Item # AA923


	Item # AA923, ARON ALPHA Type 901H2F

larger image

Good for moist and heat resistance in rubber

Specifications · Before Curing · After Curing · Characteristics of Aron Alpha® Cyanoacrylate Adhesives · Setting Time · Bonding Strength (Tensile) · Bonding Strength (Shear) · Applications · Features · Storage · Method of Disposal · Precaution · Warning

Specifications

Series		900

Type		901H2F

Unit Size		20 gm bottle

Units per case		25

Color		Clear

Gap Fill		0.004"

Viscosity		5 cps

Tensile Shear Strength (Steel)		4000 psi

Temperature Range		-65 ºF to +180 ºF

Set Time (Steel)		10 s

Tensile Strength		0.5 x 0.5 x 1.5 inch; bonded area 0.25 sq. inch

Tensile Shear Strength (for plastic and rubber)		0.1 x 1.0 x 4.0 inch; bonded area 0.5 sq.inch

Tensile Shear Strength (for metal)		0.064 x 1.0 x 4.0 inch; bonded area 0.5 sq. inch

Bonding Atmosphere		22 to 24 ºC 72 to 75 ºF

Relative Humidity		58-62%

Testing Methods		ASTM D2095, D3164, and D1002

Before Curing

Appearance (Liquid State)		Colorless and Transparent

Base Monomer (Liquid State)		Ethyl 2-Cyanoacrylate

Viscosity (Liquid State)		7 cps

Specific Gravity (d²⁰)-(Liquid State)		1.067

Solubility Parameter		10-11

After Curing

Appearance (Solid State)		Colorless and Transparent

Specific Gravity (d²⁰)-(Solid State)		1.214

Hardness (Shore D, 23°C/ 73°F)		80

Glass Transition Point (Solid State)		123 ºC 253 ºF

Characteristics of Aron Alpha® Cyanoacrylate Adhesives

Characteristics		Instant Bonding : Adhesion is achieved in a few seconds, It is well suited for increasing the efficiency of the manufacturing process. Easy to use: Adhesive is single component and heat treatment are not required. Perfect f

Setting Time

(in seconds for various materials)

Material	Setting Times (sec)
	901H2	901H2F	901H3	922H2	903TX
Rigid PVC	3		5	3	5
ABS	10		10	10	10
Natural Rubber	15		30	30	30
Neoprene Rubber	5		5	10	5
Copper	10		10	N/A	10

Bonding Strength (Tensile)

(Tensile measured in psi for various materials)

Material	Tensile Strengths (psi)
	901H2	901H2F	901H3	922H2	903TX
Rigid PVC	3600		3500	3800	2400
Aluminum	2700		2700	2800	1800

Bonding Strength (Shear)

(Shear measured in psi for various materials)

Material	Shear Strengths (psi)
	901H2	901H2F	901H3	922H2	903TX
Natural Rubber	110		110	110	110
Neoprene Rubber	110		110	120	110
EPDM Rubber				190

Applications

For Wood Work: Suitable for bonding wood. Complete and wide range of adhesive grades available. Suitable for assembling wooden products and repairing. Wooden molds and expensive rare woods.
Artificial Marble: For use on artificial marble with various kinds of colors such as transparent, white, black and grey.
Color Grades: Able to confirm the coating colors of adhesives.
Remover: For use in removing hardened substances and peel off parts of adhesives

Features

Soft and flexible type
Excellent resistance to heat and humidity after bonding various rubbers.
Low shrinkage property

Storage

Store product in the unopened container in a dry location.

Humidity

Avoid moist, humid storage conditions.
Fasten cap tightly to avoid exposure to moisture.
Store with desiccant.

Temperature

Avoid storing at a

Method of Disposal

Expose the adhesives in the containers to moisture and light to let it harden slowly, and to treat it as waste plastics (drastic hardening may result in heating, pay attention to this situation).
Please comply with local regulations when dispos

Precaution

When in contact with Skin

Don't peel it off forcibly, instead use warm water or remover to rub it off.

When in contact with Eyes

It will damage the eyes to rub the eyes or to use solvents. Must rinse with large amount of water and get medical attention.

Warning

May have an irritating odor, Aron Alpha might irritate eyes, nose and throat. Please maintain proper ventilation it is used in large amounts or for a long period of time. Please wear protective glasses and/or hood shield.
In case of absorbing into cloth, Aron Alpha will rapidly polymerize and result in heating. During operation, avoid wearing gloves made of absorbable materials, instead use solvent proof polyethylene gloves.
ARON ALPHA is a flammable liquid. Use in a well ventilated area, and keep away from fire.
Eye and Skin irritant. Bonds skin instantly. Combustible - keep away from heat and flames.

DOWNLOADS


		900H Series TDS.pdf (PDF, 102KB)

		901H2F SDS.pdf (PDF, 251KB)

Surface Primers and Accelerators



	ARON ALPHA PP Primer



	ARON ALPHA PP Primer S

more available ..

Item # AA923, ARON ALPHA Type 901H2F

Series

Type

Unit Size

Units per case

Color

Gap Fill

Viscosity

Tensile Shear Strength (Steel)

Temperature Range

Set Time (Steel)

Tensile Strength

Tensile Shear Strength (for plastic and rubber)

Tensile Shear Strength (for metal)

Bonding Atmosphere

Relative Humidity

Testing Methods

Appearance (Liquid State)

Base Monomer (Liquid State)

Viscosity (Liquid State)

Specific Gravity (d20)-(Liquid State)

Solubility Parameter

Appearance (Solid State)

Specific Gravity (d20)-(Solid State)

Hardness (Shore D, 23°C/ 73°F)

Glass Transition Point (Solid State)

Characteristics

Quick Contact

Specific Gravity (d²⁰)-(Liquid State)

Specific Gravity (d²⁰)-(Solid State)