Item # AA875, ARON ALPHA Type 401X On Toagosei America, Inc.

All Toagosei America Technologies > Instant Adhesives > Toughened & Impact Resistant Instant Adhesives: ARON ALPHA 400 SERIES > Item # AA875


	Item # AA875, ARON ALPHA Type 401X

larger image

Aron Alpha 400X Series
Aron Alpha 400X Series is engineered for high temperature and high impact resistance. Excellent bond strength in conditions up to 250°F

Specifications · Before Curing · After Curing · Characteristics of Aron Alpha® Cyanoacrylate Adhesives · Storage · Method of Disposal · Setting Time · Bonding Strength (Tensile) · Bonding Strength (Shear) · Impact Strength · Heat Resistance · How to Apply · Precaution · Applications · Features · Additional Information · Warning

Specifications

Series		400X

Type		401X

Unit Size		20 gm bottle

Units per case		25

Color		Clear

Gap Fill		0.002"

Viscosity		2 cps

Tensile Shear Strength (Steel)		5800 psi

Temperature Range		-65 ºF to +250 ºF

Set Time (Steel)		15 s

Bonding Strength to Metal		Excellent

Bonding Strength to Electroplating		Good

Bonding Strength to Plastic		Good

Anti Shock Resistance		Good

Set Time(PVC)		10 s

Set Time (ABS)		10 s

Set Time (Polycarbonate)		60 s

Set Time (Steel)		45 s

Set Time (Aluminum)		60 s

Tensile Strength (PVC)		30 N/mm²

Tensile Strength (ABS)		24 N/mm²

Tensile Strength (Iron)		42 N/mm²

Tensile Strength (Aluminum)		41 N/mm²

Tensile Shearing Strength (Polycarbonate)		6 N/mm²

Form of Packing (20g)		Good

Boiling Point		60 ºC 140 ºF

Pressure		5

Surface Tension		34 dynes/mm

Solubility Parameter		10-11

Solvents		Acetone, Dimethyl formamid, Dimethyl Sulfoxide

Rate of Line Expansion (x 10^-4)-(Solid State)		1.1

Volume dielectric resistivity (Ω-cm, 86°F)		10¹⁴

Tensile Strength		0.5 x 0.5 x 1.5 inch; bonded area 0.25 sq. inch

Tensile Shear Strength (for plastic and rubber)		0.1 x 1.0 x 4.0 inch; bonded area 0.5 sq.inch

Tensile Shear Strength (for metal)		0.064 x 1.0 x 4.0 inch; bonded area 0.5 sq. inch

Bonding Atmosphere		22 to 24 ºC 72 to 75 ºF

Relative Humidity		58-62%

Testing Methods		ASTM D2095, D3164, and D1002

Before Curing

Appearance (Liquid State)		Colorless and Transparent

Base Monomer (Liquid State)		Ethyl 2-Cyanoacrylate

Viscosity (Liquid State)		2 cps

Specific Gravity (d²⁰)-(Liquid State)		1.05

Flash Point (Closed Cup)-(Liquid State)		83 ºC 181 ºF

Freezing Point (Liquid State)		-30 ºC -22 ºF

After Curing

Appearance (Solid State)		Colorless and Transparent

Specific Gravity (d²⁰)-(Solid State)		1.25

Hardness (Rockwell M)-(Solid State)		85

Softening Point (Vicat)-(Solid State)		145 ºC 293 ºF

Refractive Index (n²⁰)-(Solid State)		1.49

Glass Transition Point (Solid State)		140 ºC 284 ºF

Dielectric Constant (10MC, 50°F)-(Solid State)		3.5

Characteristics of Aron Alpha® Cyanoacrylate Adhesives

Characteristics		Instant Bonding : Adhesion is achieved in a few seconds, It is well suited for increasing the efficiency of the manufacturing process. Easy to use: Adhesive is single component and heat treatment are not required. Perfect f

Storage

Expose the adhesives in the containers to moisture and light to let it harden slowly, and to treat it as waste plastics (drastic hardening may result in heating, pay attention to this situation).
Please comply with local regulations when dispos

Method of Disposal

Expose the adhesives in the containers to moisture and light to let it harden slowly, and to treat it as waste plastics (drastic hardening may result in heating, pay attention to this situation).
Please comply with local regulations when dispos

Setting Time

<col width="75" span="2" style="width

Bonding Strength (Tensile)

(Tensile measured in psi for various materials)

Material	Tensile Strength (psi)
	401X	402X	403X
Steel	5800
Aluminum	5800
Copper	5800
Stainless Steel	6400
Rigid PVC/Steel	2800
Copper/Phenolic resin	4300
Aluminum/ABS	2600
Stainless Steel/Neoprene	360

Bonding Strength (Shear)

(Shear measured in psi for various materials)

Material	Shear Strength (psi)
	401X	402X	403X
Steel	3300
Aluminum	2500
Copper	2800
Stainless Steel	3100
Rigid PVC/Steel	1000
Copper/Phenolic resin	1000
Aluminum/ABS	710
Stainless Steel/Neoprene	70

Impact Strength

(kgf cm/cm2)

	401X	402X	403X
Steel	28
Aluminum	13
Copper	15
Stainless Steel	13
Brass	13

Heat Resistance

Heat Resistance (psi)

a) Measured under heated conditions

Temperature (°F) x hours	401X	402X	403X
212 x 6	2800
212 x 12	2800
266 x 6	1400
266 x 12	1400
302 x 6	570
302 x 12	430

b) Measured at room temperature after cooling
Temperature (°F) x hours	401X	402X	403X
212 x 6	3300
212 x 12	3300
266 x 6	2700
266 x 12	2600
302 x 6	1800
302 x 12	1600

How to Apply

When in contact with Skin

Don't peel it off forcibly, instead use warm water or remover to rub it off.

When in contact with Eyes

It will damage the eyes to rub the eyes or to use solvents. Must rinse with large amount of water and get medical attention.

Precaution

When in contact with Skin

Don't peel it off forcibly, instead use warm water or remover to rub it off.

When in contact with Eyes

It will damage the eyes to rub the eyes or to use solvents. Must rinse with large amount of water and get medical attention.

Applications

For Wood Work: Suitable for bonding wood. Complete and wide range of adhesive grades available. Suitable for assembling wooden products and repairing. Wooden molds and expensive rare woods.
Artificial Marble: For use on artificial marble with various kinds of colors such as transparent, white, black and grey.
Color Grades: Able to confirm the coating colors of adhesives.
Remover: For use in removing hardened substances and peel off parts of adhesives

Features

Fast setting to various materials
Good bonding strength to various materials (especially metal)
Good tensile shear strength under heated conditions or after heating
High impact strength

Additional Information

Aron Alpha 400X Series is suitable for vibrating areas such as motors and bearings. Featured characteristics are heat resistance up to + 250 °F and impact resistance. The slow curing speed affords operator time to adjust and align parts but still cures in a reasonable time for instant adhesive technology.

Warning

May have an irritating odor, Aron Alpha might irritate eyes, nose and throat. Please maintain proper ventilation it is used in large amounts or for a long period of time. Please wear protective glasses and/or hood shield.
In case of absorbing into cloth, Aron Alpha will rapidly polymerize and result in heating. During operation, avoid wearing gloves made of absorbable materials, instead use solvent proof polyethylene gloves.
ARON ALPHA is a flammable liquid. Use in a well ventilated area, and keep away from fire.

DOWNLOADS


		400X TDS.pdf (PDF, 151KB)

		401X SDS.pdf (PDF, 253KB)

Surface Primers and Accelerators



	ARON ALPHA PP Primer



	ARON ALPHA PP Primer S

more available ..

Item # AA875, ARON ALPHA Type 401X

Series

Type

Unit Size

Units per case

Color

Gap Fill

Viscosity

Tensile Shear Strength (Steel)

Temperature Range

Set Time (Steel)

Bonding Strength to Metal

Bonding Strength to Electroplating

Bonding Strength to Plastic

Anti Shock Resistance

Set Time(PVC)

Set Time (ABS)

Set Time (Polycarbonate)

Set Time (Steel)

Set Time (Aluminum)

Tensile Strength (PVC)

Tensile Strength (ABS)

Tensile Strength (Iron)

Tensile Strength (Aluminum)

Tensile Shearing Strength (Polycarbonate)

Form of Packing (20g)

Boiling Point

Pressure

Surface Tension

Solubility Parameter

Solvents

Rate of Line Expansion (x 10-4)-(Solid State)

Volume dielectric resistivity (Ω-cm, 86°F)

Tensile Strength

Tensile Shear Strength (for plastic and rubber)

Tensile Shear Strength (for metal)

Bonding Atmosphere

Relative Humidity

Testing Methods

Appearance (Liquid State)

Base Monomer (Liquid State)

Viscosity (Liquid State)

Specific Gravity (d20)-(Liquid State)

Flash Point (Closed Cup)-(Liquid State)

Freezing Point (Liquid State)

Appearance (Solid State)

Specific Gravity (d20)-(Solid State)

Hardness (Rockwell M)-(Solid State)

Softening Point (Vicat)-(Solid State)

Refractive Index (n20)-(Solid State)

Glass Transition Point (Solid State)

Dielectric Constant (10MC, 50°F)-(Solid State)

Characteristics

Quick Contact

Rate of Line Expansion (x 10^-4)-(Solid State)

Specific Gravity (d²⁰)-(Liquid State)

Specific Gravity (d²⁰)-(Solid State)

Refractive Index (n²⁰)-(Solid State)