Request Information
Aron Alpha 200F2 Series is ultra fast setting formula for bonding elastomers, metal and plastic. This series has the ultra cure speed where assembly time is most critical. Compatible with automatic dispensing technology.
Unit of Measure

Specifications

Series

 N/A 200F2

Type

 N/A 252F

Unit Size

 N/A 500 gm bottle

Units per case

 N/A 2

Color

 N/A Clear

Gap Fill

 N/A 0.007"

Viscosity

 N/A 500 cps

Tensile Shear Strength (Steel)

 N/A 4600 psi

Temperature Range

 N/A -65 ºF to +180 ºF

Set Time (Steel)

 N/A 10 s

Tensile Strength

 N/A 0.5 x 0.5 x 1.5 inch; bonded area 0.25 sq. inch

Tensile Shear Strength (for plastic and rubber)

 N/A 0.1 x 1.0 x 4.0 inch; bonded area 0.5 sq.inch

Tensile Shear Strength (for metal)

 N/A 0.064 x 1.0 x 4.0 inch; bonded area 0.5 sq. inch

Bonding Atmosphere

 N/A 22 to 24 ºC72 to 75 ºF

Relative Humidity

 N/A 58-62%

Testing Methods

 N/A ASTM D2095, D3164, and D1002

Before Curing

Appearance (Liquid State)

 N/A Colorless and Transparent

Base Monomer (Liquid State)

 N/A Ethyl 2-Cyanoacrylate

Viscosity (Liquid State)

 N/A 500 cps

Specific Gravity (d20)-(Liquid State)

 N/A 1.05

Flash Point (Closed Cup)-(Liquid State)

 N/A 83 ºC181 ºF

Freezing Point (Liquid State)

 N/A -30 ºC-22 ºF

After Curing

Appearance (Solid State)

 N/A Colorless and Transparent

Specific Gravity (d20)-(Solid State)

 N/A 1.25

Hardness (Rockwell M)-(Solid State)

 N/A 85

Softening Point (Vicat)-(Solid State)

 N/A 145 ºC293 ºF

Storage

N/A

  • Store product in the unopened container in a dry location.

Humidity

  • Avoid moist, humid storage conditions.
  • Fasten cap tightly to avoid exposure to moisture.
  • Store with desiccant.

Temperature

  • Avoid storing at a

Warning

N/A

  • May have an irritating odor, Aron Alpha might irritate eyes, nose and throat. Please maintain proper ventilation it is used in large amounts or for a long period of time. Please wear protective glasses and/or hood shield.
  • In case of absorbing into cloth, Aron Alpha will rapidly polymerize and result in heating. During operation, avoid wearing gloves made of absorbable materials, instead use solvent proof polyethylene gloves.
  • ARON ALPHA is a flammable liquid. Use in a well ventilated area, and keep away from fire.
  • Eye and Skin irritant. Bonds skin instantly. Combustible - keep away from heat and flames.

Features

N/A

  • Extra Fast setting to various materials.
  • Fast setting under low temperature and low humidity conditions.
  • Good bonding strength to various materials.
  • Good bonding strength to difficult-to-bond materials
  • Wide range of viscosities.

Characteristics of Aron Alpha® Cyanoacrylate Adhesives

Characteristics

 N/A
  • Instant Bonding :
    Adhesion is achieved in a few seconds, It is well suited for increasing the efficiency of the manufacturing process.
  • Easy to use:
    Adhesive is single component and heat treatment are not required. Perfect f

Method of Disposal

N/A

  • Expose the adhesives in the containers to moisture and light to let it harden slowly, and to treat it as waste plastics (drastic hardening may result in heating, pay attention to this situation).
  • Please comply with local regulations when dispos

Precaution

N/A

When in contact with Skin

  • Don't peel it off forcibly, instead use warm water or remover to rub it off.

When in contact with Eyes

  • It will damage the eyes to rub the eyes or to use solvents. Must rinse with large amount of water and get medical attention.

Setting Time

N/A

(in seconds for various materials)

Material Setting Time (sec)
(Substrate material bonded to substrate material) 202F 220F2 221F 231F 241F 252F 282F
PVC (Rigid)/PVC 3 3 1 1 5 5 5
PMMA (Polymethylmetacrylate)/PMMA 3 3 1 1 10 5 10
ABS (Acrylonitrile butadiene styrene)/ABS 5 5 1 3 15 15 15
PC (Polycarbonate)/PC 5 5 1 3 20 15 15
Natural Rubber/Natural Rubber 10 3 3 5 5 15 30
Steel/Steel 5 5 3 3 15 10 15
Copper/Copper 5   3 5 3 10 15
Phenolic Resin/Phenolic Resin 5   3 5 5 15 15
Rigid PVC/Steel 5 5 3 3 15 10 15
Aluminum/ABS 5 5 3 5 15 10 15
Stainless Steel/FRP 15   15 15 5 45 45
Neoprene Rubber/Steel 5 5 3 3   10 15
Neoprene Rubber/ABS 5 5 3 3   10 15

Bonding Strength (Tensile)

N/A

(Tensile measured in psi for various materials)

Material Tensile Strengths (psi)
(Substrate material bonded to substrate material) 202F 220F2 221F 231F 241F 252F 282F
PVC (Rigid)/PVC 5000 5000 5000 5000 4980 5000 5000
PMMA (Polymethylmetacrylate)/PMMA 5000 5000 5000 5000 4980 5000 5000
ABS (Acrylonitrile butadiene styrene)/ABS 3600 3600 3600 3600 3560 3600 3600
PC (Polycarbonate)/PC 5000 5000 5000 5000 4980 5000 5000
Natural Rubber/Natural Rubber 2800 360 2800 2800 360 2800 2800
Steel/Steel 4600 4600 4600 4600 4550 4600 4600
Copper/Copper 2800   2800 2800 4980 2800 2800
Phenolic Resin/Phenolic Resin 4100   4100 4100 4980 4100 4100
Rigid PVC/Steel 2600 2600 2600 2600 2560 2600 2600
Aluminum/ABS 2100 2100 2100 2100 2130 2100 2100
Stainless Steel/FRP 3800 3800 3800 3800 3560 3800 3800
Neoprene Rubber/Steel 360 360 360 360 360 360 360
Neoprene Rubber/ABS 360 360 360 360 360 360 360

Bonding Strength (Shear)

N/A

(Shear measured in psi for various materials)

Material Shear Strengths (psi)
(Substrate material bonded to substrate material) 202F 220F2 221F 231F 241F 252F 282F
PVC (Rigid)/PVC 1400 1400 1400 1400 1000 1400 1400
PMMA (Polymethylmetacrylate)/PMMA 710 710 710 710 710 710 710
ABS (Acrylonitrile butadiene styrene)/ABS 710 710 710 710 710 710 710
PC (Polycarbonate)/PC 1000 1000 1000 1000 1000 1000 1000
Natural Rubber/Natural Rubber 570 570 570 570 70 570 570
Steel/Steel 2800 2800 2800 2800 2840 2800 2800
Copper/Copper 2300   2300 2300 2990 2300 2300
Phenolic Resin/Phenolic Resin 2600   2600 2600 1000 2600 2600
Rigid PVC/Steel 1400 1400 1400 1400 1000 1400 1400
Aluminum/ABS 1000 1000 1000 1000 710 1000 1000
Stainless Steel/FRP 2300 2300 2300 2300 1000 2300 2300
Neoprene Rubber/Steel 57 57 57 57 70 57 57
Neoprene Rubber/ABS 57 57 57 57 70 57 57

Applications

N/A

  • For Wood Work: Suitable for bonding wood. Complete and wide range of adhesive grades available. Suitable for assembling wooden products and repairing. Wooden molds and expensive rare woods.
  • Artificial Marble: For use on artificial marble with various kinds of colors such as transparent, white, black and grey.
  • Color Grades: Able to confirm the coating colors of adhesives.
  • Remover: For use in removing hardened substances and peel off parts of adhesives