Item # AA783, ARON ALPHA Type 212Z On Toagosei America, Inc.

All Toagosei America Technologies > Instant Adhesives > Ultra Fast Set Instant Adhesives: ARON ALPHA 200F2 SERIES > Item # AA783


	Item # AA783, ARON ALPHA Type 212Z

larger image

Aron Alpha 200Z Series
Aron Alpha 200Z Series is engineered for tough-to-bond situations. Ultra fast setting formula excellent for challenging low surface energy substrates.

Specifications · Before Curing · After Curing · Storage · Warning · Features · Characteristics of Aron Alpha® Cyanoacrylate Adhesives · Method of Disposal · Precaution · Setting Time · Bonding Strength (Tensile) · Bonding Strength (Shear) · Applications

Specifications

Series		200Z

Type		212Z

Unit Size		500 gm bottle

Units per case		2

Color		Clear

Gap Fill		0.006"

Viscosity		100 cps

Tensile Shear Strength (Steel)		4600 psi

Temperature Range		-65 ºF to +180 ºF

Set Time (Steel)		10 s

Bonding Strength to Metal		Excellent

Bonding Strength to Electroplating		Good

Bonding Strength to Rubber		Excellent

Bonding Strength to Plastic		Excellent

Bonding Strength to Hard-Bonding Material		Good

Set Time(PVC)		5 s

Set Time (ABS)		5 s

Set Time (Polycarbonate)		5 s

Set Time (Chroloprene)		1 s

Set Time (EPDM)		1 s

Set Time (Steel)		30 s

Set Time (Aluminum)		15 s

Tensile Strength (PVC)		35 N/mm²

Tensile Strength (ABS)		25 N/mm²

Tensile Strength (Iron)		32 N/mm²

Tensile Strength (Aluminum)		25 N/mm²

Tensile Shearing Strength (Polycarbonate)		7 N/mm²

Tensile Shearing Strength (Chroloprene)		0.6 N/mm²

Tensile Shearing Strength (EPDM)		0.6

Form of Packing (20g)		Good

Form of Packing (50g)		Good

Form of Packing (500g)		Good

Tensile Strength		0.5 x 0.5 x 1.5 inch; bonded area 0.25 sq. inch

Tensile Shear Strength (for plastic and rubber)		0.1 x 1.0 x 4.0 inch; bonded area 0.5 sq.inch

Tensile Shear Strength (for metal)		0.064 x 1.0 x 4.0 inch; bonded area 0.5 sq. inch

Bonding Atmosphere		22 to 24 ºC 72 to 75 ºF

Relative Humidity		58-62%

Testing Methods		ASTM D2095, D3164, and D1002

Before Curing

Appearance (Liquid State)		Colorless and Transparent

Base Monomer (Liquid State)		Ethyl 2-Cyanoacrylate

Viscosity (Liquid State)		85 cps

Specific Gravity (d²⁰)-(Liquid State)		1.05

Flash Point (Closed Cup)-(Liquid State)		83 ºC 181 ºF

Freezing Point (Liquid State)		-29 ºC -20 ºF

After Curing

Appearance (Solid State)		Colorless and Transparent

Specific Gravity (d²⁰)-(Solid State)		1.25

Hardness (Rockwell M)-(Solid State)		85

Softening Point (Vicat)-(Solid State)		145 ºC 293 ºF

Storage

Store product in the unopened container in a dry location.

Humidity

Avoid moist, humid storage conditions.
Fasten cap tightly to avoid exposure to moisture.
Store with desiccant.

Temperature

Avoid storing at a

Warning

May have an irritating odor, Aron Alpha might irritate eyes, nose and throat. Please maintain proper ventilation it is used in large amounts or for a long period of time. Please wear protective glasses and/or hood shield.
In case of absorbing into cloth, Aron Alpha will rapidly polymerize and result in heating. During operation, avoid wearing gloves made of absorbable materials, instead use solvent proof polyethylene gloves.
ARON ALPHA is a flammable liquid. Use in a well ventilated area, and keep away from fire.
Eye and Skin irritant. Bonds skin instantly. Combustible - keep away from heat and flames.

Features

Ultra fast setting for bonding difficult-to-bond materials such as soft PVC, Polycarbonate, ABS, etc.
Low and medium viscosity grades.

Characteristics of Aron Alpha® Cyanoacrylate Adhesives

Characteristics		Instant Bonding : Adhesion is achieved in a few seconds, It is well suited for increasing the efficiency of the manufacturing process. Easy to use: Adhesive is single component and heat treatment are not required. Perfect f

Method of Disposal

Expose the adhesives in the containers to moisture and light to let it harden slowly, and to treat it as waste plastics (drastic hardening may result in heating, pay attention to this situation).
Please comply with local regulations when dispos

Precaution

When in contact with Skin

Don't peel it off forcibly, instead use warm water or remover to rub it off.

When in contact with Eyes

It will damage the eyes to rub the eyes or to use solvents. Must rinse with large amount of water and get medical attention.

Setting Time

(in seconds for various materials)

Material	Setting Time (sec)
(Substrate material bonded to substrate material)	212Z
PVC (Rigid)/PVC	10
PMMA (Polymethylmetacrylate)/PMMA	3
ABS (Acrylonitrile butadiene styrene)/ABS	5
PC (Polycarbonate)/PC	5
Natural Rubber/Natural Rubber	10
Steel/Steel	5
Copper/Copper	5
Phenolic Resin/Phenolic Resin	5
Rigid PVC/Steel	5
Aluminum/ABS	5
Stainless Steel/FRP	15
Neoprene Rubber/Steel	5
Neoprene Rubber/ABS	5

Bonding Strength (Tensile)

(Tensile measured in psi for various materials)

Material	Tensile Strengths (psi)
(Substrate material bonded to substrate material)	212Z
PVC (Rigid)/PVC	5000
PMMA (Polymethylmetacrylate)/PMMA	5000
ABS (Acrylonitrile butadiene styrene)/ABS	3600
PC (Polycarbonate)/PC	5000
Natural Rubber/Natural Rubber	2800
Steel/Steel	4600
Copper/Copper	2800
Phenolic Resin/Phenolic Resin	4100
Rigid PVC/Steel	2600
Aluminum/ABS	2100
Stainless Steel/FRP	3800
Neoprene Rubber/Steel	360
Neoprene Rubber/ABS	360

Bonding Strength (Shear)

(Shear measured in psi for various materials)

Material	Shear Strengths (psi)
(Substrate material bonded to substrate material)	212Z
PVC (Rigid)/PVC	1400
PMMA (Polymethylmetacrylate)/PMMA	710
ABS (Acrylonitrile butadiene styrene)/ABS	710
PC (Polycarbonate)/PC	1000
Natural Rubber/Natural Rubber	570
Steel/Steel	2800
Copper/Copper	2300
Phenolic Resin/Phenolic Resin	2600
Rigid PVC/Steel	1400
Aluminum/ABS	1000
Stainless Steel/FRP	2300
Neoprene Rubber/Steel	57
Neoprene Rubber/ABS	57

Applications

For Wood Work: Suitable for bonding wood. Complete and wide range of adhesive grades available. Suitable for assembling wooden products and repairing. Wooden molds and expensive rare woods.
Artificial Marble: For use on artificial marble with various kinds of colors such as transparent, white, black and grey.
Color Grades: Able to confirm the coating colors of adhesives.
Remover: For use in removing hardened substances and peel off parts of adhesives

DOWNLOADS


		212Z TDS.pdf (PDF, 114KB)

		212Z SDS.pdf (PDF, 251KB)

Surface Primers and Accelerators



	ARON ALPHA PP Primer



	ARON ALPHA PP Primer S

more available ..

Item # AA783, ARON ALPHA Type 212Z

Series

Type

Unit Size

Units per case

Color

Gap Fill

Viscosity

Tensile Shear Strength (Steel)

Temperature Range

Set Time (Steel)

Bonding Strength to Metal

Bonding Strength to Electroplating

Bonding Strength to Rubber

Bonding Strength to Plastic

Bonding Strength to Hard-Bonding Material

Set Time(PVC)

Set Time (ABS)

Set Time (Polycarbonate)

Set Time (Chroloprene)

Set Time (EPDM)

Set Time (Steel)

Set Time (Aluminum)

Tensile Strength (PVC)

Tensile Strength (ABS)

Tensile Strength (Iron)

Tensile Strength (Aluminum)

Tensile Shearing Strength (Polycarbonate)

Tensile Shearing Strength (Chroloprene)

Tensile Shearing Strength (EPDM)

Form of Packing (20g)

Form of Packing (50g)

Form of Packing (500g)

Tensile Strength

Tensile Shear Strength (for plastic and rubber)

Tensile Shear Strength (for metal)

Bonding Atmosphere

Relative Humidity

Testing Methods

Appearance (Liquid State)

Base Monomer (Liquid State)

Viscosity (Liquid State)

Specific Gravity (d20)-(Liquid State)

Flash Point (Closed Cup)-(Liquid State)

Freezing Point (Liquid State)

Appearance (Solid State)

Specific Gravity (d20)-(Solid State)

Hardness (Rockwell M)-(Solid State)

Softening Point (Vicat)-(Solid State)

Characteristics

Quick Contact

Specific Gravity (d²⁰)-(Liquid State)

Specific Gravity (d²⁰)-(Solid State)