1450 West Main Street
West Jefferson, Ohio 43162
Toll: 800-338-5192
Main: 614-718-3855
Fax: 614-718-3866
Email: sales@toagosei.net
Web Address: www.aronalpha.net
| Items |
 AA721 ARON ALPHA Type 801 |
 AA722 ARON ALPHA Type 801 |
 AA723 ARON ALPHA Type 802 |
 AA724 ARON ALPHA Type 802 |
 AA725 ARON ALPHA Type 803 |
|||||
| Series | 800 | |||||||||
| Type | 801 | 801 | 802 | 802 | 803 | |||||
| Unit Size | 20 gm bottle | 500 gm bottle | 20 gm bottle | 500 gm bottle | 20 gm bottle | |||||
| Units per case | 25 | 2 | 25 | 2 | 25 | |||||
| Color | Clear | |||||||||
| Gap Fill | 0.004" | |||||||||
| Viscosity | 10 cps | 10 cps | 85 cps | 85 cps | 1500 cps | |||||
| Tensile Shear Strength (Steel) | 4400 psi | |||||||||
| Temperature Range | -65 ºF to +130 ºF | |||||||||
| Set Time (Steel) | 3 s | 3 s | 15 s | 15 s | 30 s | |||||
| Bonding Strength to Metal | Good | Good | Good | Good | ||||||
| Bonding Strength to Electroplating | Good | Good | Good | Good | ||||||
| Bonding Strength to Rubber | Not Suitable | Not Suitable | Not Suitable | Not Suitable | ||||||
| Bonding Strength to Plastic | Good | Good | Good | Good | ||||||
| Moisture Resistance | Not Suitable | Not Suitable | Not Suitable | Not Suitable | ||||||
| Solvent Resistance | Not Suitable | Not Suitable | Not Suitable | Not Suitable | ||||||
| Set Time(PVC) | 10 s | 10 s | 20 s | 20 s | ||||||
| Set Time (ABS) | 20 s | 20 s | 45 s | 45 s | ||||||
| Set Time (Polycarbonate) | 20 s | 20 s | 60 s | 60 s | ||||||
| Set Time (Steel) | 20 s | 20 s | 45 s | 45 s | ||||||
| Set Time (Aluminum) | 20 s | 20 s | 45 s | 45 s | ||||||
| Tensile Strength (PVC) | 32 N/mm² | 32 N/mm² | 32 N/mm² | 32 N/mm² | ||||||
| Tensile Strength (ABS) | 18 N/mm² | 18 N/mm² | 18 N/mm² | 18 N/mm² | ||||||
| Tensile Strength (Iron) | 31 N/mm² | 31 N/mm² | 31 N/mm² | 31 N/mm² | ||||||
| Tensile Strength (Aluminum) | 27 N/mm² | 27 N/mm² | 27 N/mm² | 27 N/mm² | ||||||
| Tensile Shearing Strength (Polycarbonate) | 5 N/mm² | 5 N/mm² | 5 N/mm² | 5 N/mm² | ||||||
| Form of Packing (20g) | Good | Good | Good | Good | ||||||
| Form of Packing (50g) | Good | Good | Good | Good | ||||||
| Appearance (Liquid State) | Colorless and Transparent | |||||||||
| Base Monomer (Liquid State) | Ethoxyethyl 2-Cyanoacrylate | |||||||||
| Viscosity (Liquid State) | 10 cps | 10 cps | 80 cps | 80 cps | 1500 cps | |||||
| Specific Gravity (d20)-(Liquid State) | 1.07 | |||||||||
| Flash Point (Closed Cup)-(Liquid State) | 112 ºC234 ºF | |||||||||
| Freezing Point (Liquid State) | -20 ºC-4 ºF | |||||||||
| Boiling Point | 204 ºC400 ºF | |||||||||
| Pressure | 5 mmHg | |||||||||
| Surface Tension | 37 dynes/mm | |||||||||
| Solubility Parameter | 10-11 | |||||||||
| Appearance (Solid State) | Colorless and Transparent | |||||||||
| Specific Gravity (d20)-(Solid State) | 1.17 | |||||||||
| Hardness (Rockwell M)-(Solid State) | 55 | |||||||||
| Refractive Index (n20)-(Solid State) | 1.48 | |||||||||
| Hardness (Shore D, 23°C/ 73°F) | 80 | |||||||||
| Solvents | Acetone, Dimethyl formamid, Dimethyl Sulfoxide | |||||||||
| Rate of Line Expansion (x 10-4)-(Solid State) | 1.0 | |||||||||
| Glass Transition Point (Solid State) | 80 ºC176 ºF | |||||||||
| Dielectric Constant (10MC, 50°F)-(Solid State) | 3.5 | |||||||||
| Volume dielectric resistivity (Ω-cm, 86°F) | 1014 | |||||||||
| Tensile Strength | 0.5 x 0.5 x 1.5 inch; bonded area 0.25 sq. inch | |||||||||
| Tensile Shear Strength (for plastic and rubber) | 0.1 x 1.0 x 4.0 inch; bonded area 0.5 sq.inch | |||||||||
| Tensile Shear Strength (for metal) | 0.064 x 1.0 x 4.0 inch; bonded area 0.5 sq. inch | |||||||||
| Bonding Atmosphere | 22 to 24 ºC72 to 75 ºF | |||||||||
| Relative Humidity | 58-62% | |||||||||
| Testing Methods | ASTM D2095, D3164, and D1002 | |||||||||
| Set Time (Chroloprene) | ||||||||||
| Set Time (EPDM) | ||||||||||
| Tensile Shearing Strength (Chroloprene) | ||||||||||
| Tensile Shearing Strength (EPDM) | ||||||||||
| Main Ingredient | ||||||||||
|
|
||||||||||
