Toagosei America
1450 West Main Street
West Jefferson, Ohio 43162

Toll: 800-338-5192
Main: 614-718-3855
Fax: 614-718-3866
Email: sales@toagosei.net
Web Address: www.aronalpha.net
Print Back
Aron Alpha 200F Series is fast setting formula for bonding elastomers, metal and plastic. This series has a improved fixture speed over the 200 Series and has ability to bridge small gaps between substrates.
Unit of Measure

Specifications

Series

 N/A 200F

Type

 N/A 221

Unit Size

 N/A 100 gm bottle

Units per case

 N/A 15

Color

 N/A Clear

Gap Fill

 N/A 0.002"

Viscosity

 N/A 2 cps

Tensile Shear Strength (Steel)

 N/A 4600 psi

Temperature Range

 N/A -65 ºF to +180 ºF

Set Time (Steel)

 N/A 10 s

Tensile Strength

 N/A 0.5 x 0.5 x 1.5 inch; bonded area 0.25 sq. inch

Tensile Shear Strength (for plastic and rubber)

 N/A 0.1 x 1.0 x 4.0 inch; bonded area 0.5 sq.inch

Tensile Shear Strength (for metal)

 N/A 0.064 x 1.0 x 4.0 inch; bonded area 0.5 sq. inch

Bonding Atmosphere

 N/A 22 to 24 ºC72 to 75 ºF

Relative Humidity

 N/A 58-62%

Testing Methods

 N/A ASTM D2095, D3164, and D1002

Before Curing

Appearance (Liquid State)

 N/A Colorless and Transparent

Base Monomer (Liquid State)

 N/A Ethyl 2-Cyanoacrylate

Viscosity (Liquid State)

 N/A 2 cps

Specific Gravity (d20)-(Liquid State)

 N/A 1.05

Flash Point (Closed Cup)-(Liquid State)

 N/A 83 ºC181 ºF

Freezing Point (Liquid State)

 N/A -29 ºC-21 ºF

After Curing

Appearance (Solid State)

 N/A Colorless and Transparent

Specific Gravity (d20)-(Solid State)

 N/A 1.2483

Hardness (Rockwell M)-(Solid State)

 N/A 85

Softening Point (Vicat)-(Solid State)

 N/A 145 ºC293 ºF

Storage

N/A

  • Store product in the unopened container in a dry location.

Humidity

  • Avoid moist, humid storage conditions.
  • Fasten cap tightly to avoid exposure to moisture.
  • Store with desiccant.

Temperature

  • Avoid storing at a

Warning

N/A

Eye and Skin irritant. Bonds skin instantly. Combustible - keep away from heat and flames. Please read adhesive MSDS before using

Features

N/A

  • General purpose adhesive for multiple bonding applications. Added Features of 221 and 232
  • Engineered for tough-to-bond situations.
  • Ultra fast setting formula excellent for porous surfaces.

Characteristics of Aron Alpha® Cyanoacrylate Adhesives

Characteristics

 N/A
  • Instant Bonding :
    Adhesion is achieved in a few seconds, It is well suited for increasing the efficiency of the manufacturing process.
  • Easy to use:
    Adhesive is single component and heat treatment are not required. Perfect f

Method of Disposal

N/A

  • Expose the adhesives in the containers to moisture and light to let it harden slowly, and to treat it as waste plastics (drastic hardening may result in heating, pay attention to this situation).
  • Please comply with local regulations when dispos

Precaution

N/A

When in contact with Skin

  • Don't peel it off forcibly, instead use warm water or remover to rub it off.

When in contact with Eyes

  • It will damage the eyes to rub the eyes or to use solvents. Must rinse with large amount of water and get medical attention.

Setting Time

N/A

(in seconds for various materials)

Material Setting Time (sec)
(Substrate material bonded to substrate material) 201 202 203 221 232 241
PVC (Rigid)/PVC 5 10 25 3 5 10
PMMA (Polymethylmetacrylate)/PMMA 10 30 80 5 10 20
ABS (Acrylonitrile butadiene styrene)/ABS 15 60 120 3 15 50
PC (Polycarbonate)/PC 20 60 100 10 20 50
Natural Rubber/Natural Rubber 5 10 25 3 5 10
Steel/Steel 15 50 100 10 15 40
Copper/Copper 3 5 10 2 3 5
Phenolic Resin/Phenolic Resin 5 10 25 3 5 10
Rigid PVC/Steel 15 30 90 10 15 30
Aluminum/ABS 15 60 120 10 15 60
Phenolic Resin/Copper 5 10 25 3 5 10
Neoprene Rubber/Steel 10 60   5 10  
Neoprene Rubber/ABS 20 40   10 20  

Bonding Strength (Tensile)

N/A

(Tensile measured in psi for various materials)

Material Tensile Strengths (psi)
(Substrate material bonded to substrate material) 201 202 203 221 232 241
PVC (Rigid)/PVC 4980 4980 4980 4980 4980 4980
PMMA/PMMA 4980 4980 4980 4980 4980 4980
ABS/ABS 3560 3560 3560 3560 3560 3560
PC/PC 4980 4980 4980 4980 4980 4980
Natural Rubber/Natural Rubber 360 360 360 360 360 360
Steel/Steel 4550 4550 4120 4550 4550 3980
Copper/Copper 4980 4980 4550 4980 4980 4410
Phenolic Resin/Phenolic Resin 4980 4980 4980 4980 4980 4980
Rigid PVC/Steel 2560 2560 2560 2560 2560 2560
Aluminum/ABS 2130 2130 2280 2130 2130 2130
Phenolic Resin/Copper 3560 3560 3410 3560 3560 3560
Neoprene Rubber/Steel 360 360 360 360 360 360
Neoprene Rubber/ABS 360 360 360 360 360 360

Bonding Strength (Shear)

N/A

(Shear measured in psi for various materials)

Material Shear Strengths (psi)
(Substrate material bonded to substrate material) 201 202 203 221 232 241
PVC (Rigid)/PVC 1000 1000 1000 1000 1000 1000
PMMA/PMMA 710 710 710 710 710 710
ABS/ABS 710 710 710 710 710 710
PC/PC 1000 1000 1000 1000 1000 1000
Natural Rubber/Natural Rubber 70 70 70 70 70 70
Steel/Steel 2840 2840 1990 2840 2840 2840
Copper/Copper 2990 2990 2700 2990 2990 2990
Phenolic Resin/Phenolic Resin 1000 1000 1000 1000 1000 1000
Rigid PVC/Steel 1000 1000 1000 1000 1000 1000
Aluminum/ABS 710 710 710 710 710 710
Phenolic Resin/Copper 1000 1000 1000 1000 1000 1000
Neoprene Rubber/Steel 70 70   70 70  
Neoprene Rubber/ABS 70 70   70 70  

Applications

N/A

  • For Wood Work: Suitable for bonding wood. Complete and wide range of adhesive grades available. Suitable for assembling wooden products and repairing. Wooden molds and expensive rare woods.
  • Artificial Marble: For use on artificial marble with various kinds of colors such as transparent, white, black and grey.
  • Color Grades: Able to confirm the coating colors of adhesives.
  • Remover: For use in removing hardened substances and peel off parts of adhesives