|
|
|
|
|
|
|
|
|
|
|
Characteristics
|
|
- Instant Bonding :
Adhesion is achieved in a few seconds, It is well suited for increasing the efficiency of the manufacturing process.
- Easy to use:
Adhesive is single component and heat treatment are not required. Perfect f
|
|
|
|
|
|
|
(in seconds for various materials)
| Material |
Setting Times (sec) |
| |
901H2 |
901H2F |
901H3 |
922H2 |
903TX |
| Rigid PVC |
3 |
|
5 |
3 |
5 |
| ABS |
10 |
|
10 |
10 |
10 |
| Natural Rubber |
15 |
|
30 |
30 |
30 |
| Neoprene Rubber |
5 |
|
5 |
10 |
5 |
| Copper |
10 |
|
10 |
N/A |
10 |
|
|
|
|
|
(Tensile measured in psi for various materials)
| Material |
Tensile Strengths (psi) |
| |
901H2 |
901H2F |
901H3 |
922H2 |
903TX |
| Rigid PVC |
3600 |
|
3500 |
3800 |
2400 |
| Aluminum |
2700 |
|
2700 |
2800 |
1800 |
|
|
|
|
|
(Shear measured in psi for various materials)
| Material |
Shear Strengths (psi) |
| |
901H2 |
901H2F |
901H3 |
922H2 |
903TX |
| Natural Rubber |
110 |
|
110 |
110 |
110 |
| Neoprene Rubber |
110 |
|
110 |
120 |
110 |
| EPDM Rubber |
|
|
|
190 |
|
|
|
|
|
- For Wood Work: Suitable for bonding wood. Complete and wide range of adhesive grades available. Suitable for assembling wooden products and repairing. Wooden molds and expensive rare woods.
- Artificial Marble: For use on artificial marble with various kinds of colors such as transparent, white, black and grey.
- Color Grades: Able to confirm the coating colors of adhesives.
- Remover: For use in removing hardened substances and peel off parts of adhesives
|
|
|
|
- Soft and flexible type
- Excellent resistance to heat and humidity after bonding various rubbers.
- Low shrinkage property
|
|
|
|
- Store product in the unopened container in a dry location.
Humidity
- Avoid moist, humid storage conditions.
- Fasten cap tightly to avoid exposure to moisture.
- Store with desiccant.
Temperature
|
|
|
|
- Expose the adhesives in the containers to moisture and light to let it harden slowly, and to treat it as waste plastics (drastic hardening may result in heating, pay attention to this situation).
- Please comply with local regulations when dispos
|
|
|
|
|
When in contact with Skin
- Don't peel it off forcibly, instead use warm water or remover to rub it off.
When in contact with Eyes
- It will damage the eyes to rub the eyes or to use solvents. Must rinse with large amount of water and get medical attention.
|
|
|
|
- May have an irritating odor, Aron Alpha might irritate eyes, nose and throat. Please maintain proper ventilation it is used in large amounts or for a long period of time. Please wear protective glasses and/or hood shield.
- In case of absorbing into cloth, Aron Alpha will rapidly polymerize and result in heating. During operation, avoid wearing gloves made of absorbable materials, instead use solvent proof polyethylene gloves.
- ARON ALPHA is a flammable liquid. Use in a well ventilated area, and keep away from fire.
- Eye and Skin irritant. Bonds skin instantly. Combustible - keep away from heat and flames.
|
|
|
