Item # AA674, Aron Alpha PP Primer On Toagosei America, Inc.

All Toagosei America Technologies > Primers, Activators, Accelerators, Cleaners for Instant Adhesives > Primers for Polyolefine, Silicone Rubber and Other Low Surface Energy Substrates for Instant Adhesive Technology > ARON ALPHA PP Primer > Item # AA674


	Item # AA674, Aron Alpha PP Primer

larger image

ARON ALPHA PP PRIMER is a primer used to make polyolefin and other low-energy polyolefin surfaces suitable for bonding with ARON ALPHA instant adhesives. It is only recommended for difficult-to-bond substrates which include polyethylene, polypropylene and EPT (ethylene propylene terpolyer) thermoplastic rubber materials.

Only for difficult-to-bond plastics
Improves adhesion of instant adhesives to polyolefins and other low surface energy plastics

DIRECTIONS: Prime the polyethlene, polypropylene or EPT bonding surface by means of brushing or wiping with PP PRIMER soaked cloth and allow to air dry (should only take several seconds). After the PP PRIMER dries, apply ARON ALPHA cyanoacrylate (instant) adhesive to one surface (side) only and join materials quickly. Setting time is several minutes. When the two surfaces are both polyethylene, polypropylene or EPT, prime both surfaces. Use one drop of adhesive for each 1 1/2 inch surface area.

Specifications · Method of Using

Specifications

Adherent		Olefin Type Elastomers PE PP

Appearance		Faint Yellow Transparent Liquid

Solvents		n-Heptanes

Specific Gravity		0.68

Boiling Point		98.4 ºC 209 ºF

Flash Point		-4 ºC 25 ºF

Capacity		1 gal

Unit Size		1 gallon

Units per case		1

Color		Colorless

Viscosity		0.4 cps

Base		Heptane

On-Part Life		24 hrs

Dry Time		<30 sec.

Applications		All cyanoacrylates

Method of Using

First soak the skimmed cotton or felt, etc. with the Primer, and rub the bonding surface one to two times. Then proceed with bonding using Aron Alpha adhesive. Because of the affect by temperature and moisture, the capacities of the Primer cannot be fully brought into play if the coating/waiting time is prolonged. The adherent with Primer should be bonded as soon as possible.

MORE IMAGES


	· AA673_AAPPprimer_100ml

DOWNLOADS


		PP Primer Series TDS (PDF, 172KB)

		Aron Alpha Type PP Primer_SDS_Mexico-Mexican Spanish.pdf (PDF, 246KB)

		PP Primer SDS.pdf (PDF, 261KB)

Item # AA674, Aron Alpha PP Primer

Adherent

Appearance

Solvents

Specific Gravity

Boiling Point

Flash Point

Capacity

Unit Size

Units per case

Color

Viscosity

Base

On-Part Life

Dry Time

Applications

Quick Contact